Jump to content

Επαναφορά ενός Linksys WRT54G


Recommended Posts

Σήμερα είχα πρόβλημα με ένα παλιό WRT54G που δεν έδειχνε να ανταποκρίνεται στην κλασική μέθοδο reset που ήξερα:

 

To reset your router, use the following steps:

1. Press the reset button for 30 seconds.

2. The settings should now be returned to the factory default settings, meaning any changes you had made would be deleted.

3. Open up your Web browser and enter 192.168.1.1 in the address bar. For the login, leave a blank ID and enter admin as the password.

 

Πριν το πετάξω, έψαξα λίγο ακόμη και βρήκα στο wiki του dd-wrt.com οδηγίες για επαναφορά μετά από κακό φλασάρισμα firmware και είπα να δοκιμάσω πρώτα να κάνω αυτό που ονομάζουν hard reset:

 

1. Disconnect the router from UTP cables (not the power cable).

2. Push reset button for 30 secs.

3. Without releasing reset button, disconnect power cord.

4. Hold the reset button for another 30 secs.

5. Replug the power cord.

6. Still hold the reset button for another 30 secs.

7. Release the reset button and give the router about 10 secs to resettle.

8. Disconnect power cord for another 10 secs and then reconnect. All should be in default settings now.

 

Και φυσικά έπαιξε κανονικά! Γλύτωσα μερικές δεκάδες ευρώ και την ανακύκλωση ενός router...

 

Η συγκεκριμένη σελίδα έχει οδηγίες για πιο hard core revival αν έχει κολλήσει άγρια η συσκευή: http://www.dd-wrt.com/wiki/index.php/Recover_from_a_Bad_Flash

Link to comment
Share on other sites

Guest masteripper

Ωραία πιθανόν θα μου φανεί χρήσιμο σύντομα......έχω να "παίξω" με ενα παλιό WRT54g

Link to comment
Share on other sites

 Share

×
×
  • Create New...