George J. Capnias Posted July 28, 2011 Report Share Posted July 28, 2011 Μετά την προσπάθεια εγκατάστασης του Update RollUp 3-v3 Exchange 2010 SP1, κατέληξα να έχω όλα τα services του Exchange disabled, και όχι μόνο - και όλος ο IIS είναι disabled. Μετά από αναζητήσεις στο Internet, πιθανολογώ ότι το πρόβλημα έχει προέλθει από την προσπάθεια του server να κάνει update στα certificate revocation, μιας και ο server δεν είναι συνδεμένος στο Internet. Το πρόβλημα με τα certificates, πιστεύω ότι λύθηκε, μετά από την αλλαγή που έγιναν στα settings του IE... Με το υπόλοιπο μέρος, πως ξαναφέρνω τον Exchange 2010, σε λειτουργία έχει κάποιος να προσφέρει κάποια βοήθεια; Ευχαριστώ, George J. Link to comment Share on other sites More sharing options...
pkalog Posted July 28, 2011 Report Share Posted July 28, 2011 Το UR εχεί εγκατασταθεί ? αν οχι κάνε την εγκατάσταση και θα φτιάξει τα services απο μόνο του Link to comment Share on other sites More sharing options...
George J. Capnias Posted July 28, 2011 Author Report Share Posted July 28, 2011 Το UR εχεί εγκατασταθεί ? αν οχι κάνε την εγκατάσταση και θα φτιάξει τα services απο μόνο του Όχι δεν έχει μπει - δηλαδή τώρα με το check για τα certificates revocation disabled, θα το τρέξω και θα τα επαναφέρει όλα; George J. Link to comment Share on other sites More sharing options...
pkalog Posted July 28, 2011 Report Share Posted July 28, 2011 οοο ναι δεν νομίζω να παίζει κάποιο ρόλο αλλά κανε την εγκατάσταση απο ένα Elevated command prompt (Run As Administrator) Link to comment Share on other sites More sharing options...
Catastrophic Failure Posted July 28, 2011 Report Share Posted July 28, 2011 Καλημέρα Γιώργο,<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /> To Update RollUp 3-v3 Exchange 2010 SP1 ανέφερες ότι δεν εγκαταστάθηκε, άρα υπήρξε failure. Μέσα στην registry παράδειγμα: HKLM\Software\Microsoft\Exchange\v14.0\<name of role> εάν έχεις Watermarks. Όπως επίσης έλεγξε εάν η ConfiguredVersion και UnpackedVersion έχουν την ίδια version, περισσότερες πληροφορίες θα βρεις εδώ. Link to comment Share on other sites More sharing options...
Blackman Posted July 28, 2011 Report Share Posted July 28, 2011 αχ αυτά τα update rollups...3 φορές έχω καεί... Link to comment Share on other sites More sharing options...
George J. Capnias Posted July 28, 2011 Author Report Share Posted July 28, 2011 Καλημέρα Γιώργο, To Update RollUp 3-v3 Exchange 2010 SP1 ανέφερες ότι δεν εγκαταστάθηκε, άρα υπήρξε failure. Μέσα στην registry παράδειγμα: HKLM\Software\Microsoft\Exchange\v14.0\<name of role> εάν έχεις Watermarks. Όπως επίσης έλεγξε εάν η ConfiguredVersion και UnpackedVersion έχουν την ίδια version, περισσότερες πληροφορίες θα βρεις εδώ. Εϊδα τα registry και οι εκδόσεις είναι ίδιες και δεν υπάρχουν watermarks. Ετρεξα πάλι το Update Rollup - από command line as administrator - και δεν εγκαταστάθηκε, πάλι. Το έτρεξα 3η φορά με το option να κάνει ένα log. Πρέπει να πω ότι το log αρχείο με τρόμαξε με αυτά που είδα - είναι attached στο μήνυμα.... George J. Link to comment Share on other sites More sharing options...
Catastrophic Failure Posted July 28, 2011 Report Share Posted July 28, 2011 Δοκίμασε να εγκαταστήσεις το Update Rollup 4 for Exchange Server 2010 Service Pack 1 και πες μου εάν σου εμφανίζει το ίδιο error 1603. Επίσης, απενεργοποίησε το AV/Firewall.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /> Link to comment Share on other sites More sharing options...
Catastrophic Failure Posted July 28, 2011 Report Share Posted July 28, 2011 Σε ποιον ρόλο του Exchange σου χτυπάει το error (HUB,CAS,MB etc)?<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /> Link to comment Share on other sites More sharing options...
pkalog Posted July 28, 2011 Report Share Posted July 28, 2011 αυτα τα έχεις κάνει ? http://support.microsoft.com/kb/981474 μιας και παίρνεις 1603 Link to comment Share on other sites More sharing options...
George J. Capnias Posted July 28, 2011 Author Report Share Posted July 28, 2011 Λοιπόν με βάση το ΚΒ981474 μόνο το LocalMachine έχει defined policy που δείχνει RemoteSigned - το μηχάνημα είναι AD DS. Οι ρόλοι που έχει το μηχάνημα είναι ClientAccess, HubTransport & Mailbox - μιας και δεν παίζει τίποτα, τα είδα από το registry. Σημείωση ότι η έκδοση που αναφέρεται στο registry είναι η 14.1.218.15 Δοκίμασα και το Rollup Update 4 v2 και απέτυχε - συνημμένο το Log αρχείο, που λίγο ως πολύ είναι το ίδιο με το προηγούμενο... George J. Link to comment Share on other sites More sharing options...
apostolos Posted July 28, 2011 Report Share Posted July 28, 2011 Property©: CheckUrlResponseWebsite = http://crl.microsoft.com/pki/crl/products/CodeSigPCA.crl Property©: WARNING_MESSAGE_CONTINUE = To ignore this warning and proceed with the installation, click Continue. Property©: WARNING_MESSAGE_DOTNET = has determined that a successful installation of this package may require installation of a missing .NET Framework hotfix. Some Microsoft Exchange services may not restart after the installation has completed. For more information about how to resolve this problem, visit: Property©: WARNING_LINK_DOTNET = http://go.microsoft.com/fwlink/?LinkId=158004 Property©: WARNING_MESSAGE_CRLBIT = has determined that Certificate Revocation List (CRL) checking is enabled on this computer. CRL checking can significantly slow the installation of this package. For more information about how to resolve this problem, visit: Property©: WARNING_LINK_CRLBIT = http://go.microsoft.com/fwlink/?LinkId=158006 Property©: msgErrorExchangeAdmin = The user who's currently logged on doesn't have sufficient permissions to install this package. You need at least Exchange Server Administrator permissions on the current computer to complete this task. Έχω βρει ένα άρθρο που αναφέρει ότι υπάρχει θέμα με τα Certificate Revocation Lists αν δεν έχει internet ο server. Φαντάζομαι ότι έχει. Δες και το τρίτο για τα permissions του χρήστη. Έχει κάνει win update για όλα τα components του server? Sql server, office κλπ? Μήπως φταίει κάτι απο εκεί. Δες και αυτό Property(S): msgINTERIMUPDATEDETECTED = Unable to install because a previous Interim Update for Exchange Server 2010 has been installed. Please use Add/Remove Programs to uninstall the Interim Update before running this setup again. Property(S): ButtonText_Remove = &Remove Property(S): msgRequiresProc = The version of this file is not compatible with the version of Exchange Server 2010 that you're running. Check your computer to see whether you need an x64 (64-bit) or x86 (32-bit) version of this file.ω Link to comment Share on other sites More sharing options...
pkalog Posted July 28, 2011 Report Share Posted July 28, 2011 στον Event Viewer τι λάθος σου βγάζει ? ειναι τελικά 1603 ? αν μπορείς μην τρέξεις το msp απο το desktop σου μην ειναι και θεμα permissions (λεω εγω τωρα) Λογικα εχεις κάνει disable στον ΙΕ το revocation check ε ? http://technet.microsoft.com/en-us/library/ff637981.aspx Link to comment Share on other sites More sharing options...
Catastrophic Failure Posted July 28, 2011 Report Share Posted July 28, 2011 Product name<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /> Build number Microsoft Exchange Server 2010 SP1 14.1.218.15= ΝΟ RU Known Issues & Pre Installation Checklistv Link to comment Share on other sites More sharing options...
George J. Capnias Posted July 28, 2011 Author Report Share Posted July 28, 2011 Είναι εμφανές από το log ότι τα assemblies του Exchange δεν έχουν γίνει native images - το ngen που κάνει αυτή τη δουλειά χρειάζεται τα certificates για να μπορέσει να το κάνει αυτό. Σε συνέχεια του τελευταίου, δεν υπάρχει κάποιο policy που να το αποτρέψει, παρά το settings αυτό είναι σε επίπεδο χρήστη μέσα στον Internet Explorer []. Λαμβάνοντας υπόψη ότι μέσα στο Programs and Features/Updates, φαίνεται ότι υπάρχει περάσει το Update Roll-up 1 του Exchange Server 2010, το συμπέρασμα είναι ότι το RU 1 μπήκε, δεν βρήκε certificates, και άφησε τα assemblies χωρίς να φτιάξει τα native images. Συνέπεια είναι να μην γίνεται το ίδιο uninstall, αλλά να μην μπορεί να μπει κάποιο επόμενο RU γιατί δεν μπορεί να γίνει αντιληπτή η έκδοση που είναι ήδη εγκατεστημένη... Τα λάθη που έχω στο Event Log κατά την προσπάθεια να ξαναβάλω το Update Roll-Up 1: Beginning a Windows Installer transaction: C:\Windows\Installer\1490ff.msi. Client Process Id: 8092. Starting session 0 - ?2011?-?07?-?28T16:38:38.594513700Z. Activation context generation failed for "C:\Windows\system32\conhost.exe". Dependent Assembly Microsoft.Windows.SystemCompatible,processorArchitecture="amd64",publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.7600.16823" could not be found. Please use sxstrace.exe for detailed diagnosis. Activation context generation failed for "C:\Windows\system32\conhost.exe". Dependent Assembly Microsoft.Windows.SystemCompatible,processorArchitecture="amd64",publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.7600.16823" could not be found. Please use sxstrace.exe for detailed diagnosis. Activation context generation failed for "C:\Windows\system32\conhost.exe". Dependent Assembly Microsoft.Windows.SystemCompatible,processorArchitecture="amd64",publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.7600.16823" could not be found. Please use sxstrace.exe for detailed diagnosis. Activation context generation failed for "C:\Windows\system32\conhost.exe". Dependent Assembly Microsoft.Windows.SystemCompatible,processorArchitecture="amd64",publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.7600.16823" could not be found. Please use sxstrace.exe for detailed diagnosis. Ending a Windows Installer transaction: C:\Windows\Installer\1490ff.msi. Client Process Id: 8092. Ending session 0 started ?2011?-?07?-?28T16:38:38.594513700Z. Product: Microsoft Exchange Server - Update 'Update Rollup 1 for Exchange Server 2010 Service Pack 1 (KB2407028) 14.1.255.2' could not be installed. Error code 1603. Additional information is available in the log file C:\Users\gc03259\Desktop\install.1.txt. Windows Installer installed an update. Product Name: Microsoft Exchange Server. Product Version: 14.1.218.15. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Update Rollup 1 for Exchange Server 2010 Service Pack 1 (KB2407028) 14.1.255.2. Installation success or error status: 1603. Product: Microsoft Exchange Server -- Configuration failed. Windows Installer reconfigured the product. Product Name: Microsoft Exchange Server. Product Version: 14.1.218.15. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 1603. Και το Install log attached... George J. Link to comment Share on other sites More sharing options...
pkalog Posted July 28, 2011 Report Share Posted July 28, 2011 Ti OS version εχεις ? Win2008 R2 RTM ? Link to comment Share on other sites More sharing options...
George J. Capnias Posted July 28, 2011 Author Report Share Posted July 28, 2011 Ti OS version εχεις ? Win2008 R2 RTM ? Ναι! George J. Link to comment Share on other sites More sharing options...
i-away Posted July 29, 2011 Report Share Posted July 29, 2011 Δες λιγο τα .net σου ειναι Updated kai latest? Επίσης δες αν ειναι ανοιχτό το unrestricted sto remote execution policy και ενημερωσε μας . Για την ακρίβεια msiexec /lv c:\temp\ex-ur3-install.log /update C:\temp\Exchange2010-KB981401-x64-en.msp τρεξτο έτσι ώστε να κάνει και installation log. Επίσης τα Policies σου πρέπει να είναι Scope ExecutionPolicy ----- --------------- MachinePolicy Undefined UserPolicy Undefined Process Undefined CurrentUser Undefined LocalMachine RemoteSigned Αν είναι έτσι μετά τρέχοντας το σαν admin δεν θα έχεις πρόβλημα. Link to comment Share on other sites More sharing options...
George J. Capnias Posted July 29, 2011 Author Report Share Posted July 29, 2011 Δες λιγο τα .net σου ειναι Updated kai latest? Επίσης δες αν ειναι ανοιχτό το unrestricted sto remote execution policy και ενημερωσε μας . Για την ακρίβεια msiexec /lv c:\temp\ex-ur3-install.log /update C:\temp\Exchange2010-KB981401-x64-en.msp τρεξτο έτσι ώστε να κάνει και installation log. Επίσης τα Policies σου πρέπει να είναιScope ExecutionPolicy----- ---------------MachinePolicy UndefinedUserPolicy UndefinedProcess UndefinedCurrentUser UndefinedLocalMachine RemoteSigned Αν είναι έτσι μετά τρέχοντας το σαν admin δεν θα έχεις πρόβλημα. Τα Policies είναι έτσι όπως τα περιγράφεις - το log μπορείς να το δεις στο μήνυμα http://autoexec.gr/forums/permalink/35087/35094/ShowThread.aspx#35094, είναι attached μέσα σε .zip αρχεία... Δεν είναι πρόβλημα στο σύστημα, ή θέμα διακαιωμάτων - ο λογαριασμός που τρέχει το roll-up είναι enterprise admin - και updates μέσω WSUS μπαίνουν συστηματικά. George J. Link to comment Share on other sites More sharing options...
i-away Posted July 29, 2011 Report Share Posted July 29, 2011 Θα επιμείνω .. 1) ΈΧει το account Exchange Organization Administrator priviledges ? Δοκίμασε να κάνεις import το παρακάτω reg: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell] [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1] "Install"=dword:00000001 "PID"="89383-100-0001260-04309" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\0409] "Install"=dword:00000001 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\PowerShellEngine] "ApplicationBase"="C:\\Windows\\System32\\WindowsPowerShell\\v1.0" "PSCompatibleVersion"="1.0, 2.0" "RuntimeVersion"="v2.0.50727" "ConsoleHostAssemblyName"="Microsoft.PowerShell.ConsoleHost, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=msil" "ConsoleHostModuleName"="C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\Microsoft.PowerShell.ConsoleHost.dll" "PowerShellVersion"="2.0" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\PowerShellSnapIns] @="" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\PowerShellSnapIns\Microsoft.Exchange.Management.PowerShell.E2010] "CustomPSSnapInType"="Microsoft.Exchange.Management.PowerShell.AdminPSSnapIn" "ApplicationBase"="C:\\Program Files\\Microsoft\\Exchange Server\\V14\\bin" "AssemblyName"="Microsoft.Exchange.PowerShell.Configuration, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" "Description"="Admin Tasks for the Exchange Server" "ModuleName"="C:\\Program Files\\Microsoft\\Exchange Server\\V14\\bin\\Microsoft.Exchange.PowerShell.Configuration.dll" "PowerShellVersion"="1.0" "Vendor"="Microsoft Corporation" "Version"="14.0.0.0" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\PowerShellSnapIns\Microsoft.Exchange.Management.PowerShell.Setup] "CustomPSSnapInType"="Microsoft.Exchange.Management.PowerShell.SetupPSSnapIn" "ApplicationBase"="C:\\Program Files\\Microsoft\\Exchange Server\\V14\\bin" "AssemblyName"="Microsoft.Exchange.PowerShell.Configuration, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" "Description"="Setup Tasks for the Exchange Server" "ModuleName"="C:\\Program Files\\Microsoft\\Exchange Server\\V14\\bin\\Microsoft.Exchange.PowerShell.configuration.dll" "PowerShellVersion"="1.0" "Vendor"="Microsoft" "Version"="14.0.0.0" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\PowerShellSnapIns\Microsoft.Exchange.Management.Powershell.Support] "CustomPSSnapInType"="Microsoft.Exchange.Management.Powershell.Support.SupportPSSnapIn" "ApplicationBase"="C:\\Program Files\\Microsoft\\Exchange Server\\V14\\bin" "AssemblyName"="Microsoft.Exchange.Management.Powershell.Support, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" "Description"="Support Tasks for the Exchange Server" "ModuleName"="C:\\Program Files\\Microsoft\\Exchange Server\\V14\\bin\\Microsoft.Exchange.Management.Powershell.Support.dll" "PowerShellVersion"="1.0" "Vendor"="Microsoft Corporation" "Version"="14.0.0.0" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\PSConfigurationProviders] [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\PSConfigurationProviders\Microsoft.PowerShell] "ApplicationBase"="C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\" "AssemblyName"="System.Management.Automation, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=msil" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\ShellIds] [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\ShellIds\Microsoft.PowerShell] "ExecutionPolicy"="RemoteSigned" "Path"="C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\ShellIds\ScriptedDiagnostics] "ExecutionPolicy"="Unrestricted" Τσέκαρε και το 1 και ξανατρέξε απο elevated prompt. Και ενημέρωσε μας. Εναλλάκτικα μπορείς να βάλεις και το UR 4 που περιλαμβάνει τα fixes του UR3 . Επίσης δες αν κάποιο απο τα services είναι σε stopping. Link to comment Share on other sites More sharing options...
George J. Capnias Posted July 29, 2011 Author Report Share Posted July 29, 2011 Θα επιμείνω .. 1) ΈΧει το account Exchange Organization Administrator priviledges ? Τσέκαρε και το 1 και ξανατρέξε απο elevated prompt. Και ενημέρωσε μας. Εναλλάκτικα μπορείς να βάλεις και το UR 4 που περιλαμβάνει τα fixes του UR3 . Επίσης δες αν κάποιο απο τα services είναι σε stopping. Ναι, ο λογαριασμό του χρήστη που χρησιμοποιείται είναι στο Exchange Management Group Το Execution Policy είναι όπως το περιγράφεις πιο πάνω - καταλαβαίνεις ότι απ' ευθείας εισαγωγή στο registry, δεν γίνεται σε production server... Έχω ήδη δοκιμάσει να τρέξω και το UR4 - αν δεις στην προηγούμενη σελίδα μηνυμάτων, υπάρχει και το .log αρχείο που έγραψε συνημμένο σε προηγούμενο μηνυμά μου... George J. Link to comment Share on other sites More sharing options...
i-away Posted July 29, 2011 Report Share Posted July 29, 2011 Με καλό backup όλα γίνονται. Για αρχή ελέγξε αν ταιριάζουμε τα υπαρχοντα key της registry με αυτά που έγραψα. Link to comment Share on other sites More sharing options...
Catastrophic Failure Posted July 29, 2011 Report Share Posted July 29, 2011 Καλημέρα Γιώργο, <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /> Στα Event Logs (Application) έχεις το ακόλουθο error? Event Type: Error Event Source: MsiInstaller Event Category: None Event ID: 1024 Σου είναι εύκολο να μας κάνεις attach και το Exchange Setup Log? Link to comment Share on other sites More sharing options...
pkalog Posted July 29, 2011 Report Share Posted July 29, 2011 δεν κάνεις και εγκατάσταση το SP1 του R2 ? για να περάσει τα σωστά αρχεία για conhost.exe κλπ Link to comment Share on other sites More sharing options...
dimitris Posted July 30, 2011 Report Share Posted July 30, 2011 Γιώργο η λύση λογικά είναι αυτή που είπε πριν ο Παύλος, δηλαδή να το τρέξεις σε elevated command prompt, το δοκίμασες? Link to comment Share on other sites More sharing options...
Recommended Posts