Jump to content

Intel Server


Recommended Posts

Καλησπέρα σε όλους,

 

ναι καλά διαβάσατε, έχω μπλέξει με έναν Intel Server P4308CMHEN S2600CP. Δυστυχώς εμπειρία υπάρχει σε Dell, IBM & Dell servers αλλά αυτό είναι κάτι πρωτόγνωρο. Δεν ξέρω αν είναι το σωστό section για συμβουλές για σίδερα, αν όχι ευχάριστος να το μεταφέρω.

 

Το πρόβλημα δημιουργήθηκε μετά από BIOS Update. Τα ανεμιστηράκια δουλεύουν στο τέρμα, ~8200RPM και δεν κατεβαίνουν, με αποτέλεσμα πολύ φασαρία αλλά και μείωση χρόνου ζωής χωρίς λόγο.

Εντόπισα το πρόβλημα μάλλον στο εξής: BMC FW Health sensor has failed and may not be providing a valid reading Warning 0x0010 το οποίο είναι και το μόνο warning log που μου δίνει, όλα τα άλλα πράσινα.

 

Τι έχω κάνει μέχρι τώρα, χωρίς αποτέλεσμα:

Shutdown the server, remove both power cords for 30 seconds and the power on

Load BIOS defaults

Updated again the FRUSDR using the "FRUSDR.nsh" command and it was successful

Updated the BIOS again, successful

 

Περισσότερα στοιχεία για όποιον γνωρίζει, θέλει & μπορεί να βοηθήσει:

 

Intel Server P4308CMHEN with the S2600CP.

Board Information: Product Name : S2600CP | Serial Number: QSCP35000469 | Part/Model Number : E99552-510 | FRU File ID : FRU Ver 1.00

 

I recently updated the BIOS to the latest, 02.03.0003BMC6580, and the update was successful

This update package includes the following system software updates:

- System BIOS - 02.03.0003 - ME Firmware - 02.01.07.328 - BMC Firmware - 01.21.6580 - FRUSDR - 1.11

 

The actual readings from the BMC console now are:

BIOS ID : SE5C600.86B.02.03.0003.041920141333

BMC FW Rev : 01.21.6580

Boot FW Rev : 01.17

SDR Package Version : SDR Package 1.11

Mgmt Engine (ME) FW Rev : 02.01.07.328

 

After the update the FANs are operating in full speed, ~8200RPM, and the server is extremely noisy. At the Sensor Readings of the BMC console it reports: BMC FW Health sensor has failed and may not be providing a valid reading Warning 0x0010

 

What I have done already:

Shutdown the server, remove both power cords for 30 seconds and the power on

Load BIOS defaults

Updated again the FRUSDR using the "FRUSDR.nsh" command and it was successful

Updated the BIOS again, successful

 

Οποιαδήποτε ιδέα ευπρόσδεκτη

Ευχαριστώ

 

Link to comment
Share on other sites

Παίζει, απλά το νέο BIOS λύνει ένα πιο σημαντικό θέμα, με το Power Supply Redundancy, οπότε θέλω να εξαντλήσω πρώτα ότι μπορέσω να βρω για να μείνω στο καινούργιο. Έχω ανοίξει και ένα case στο community support της Intel, ότι βρω θα το ποστάρω κι εδώ.

Link to comment
Share on other sites

Λοιπόν την βρήκα τη λύση. Κατέβασα και έτρεξα το Intel System Information Retrieve Utility και το log τα λέει όλα από τις πρώτες 7 γραμμές:

 

BIOS Version....... SE5C600.86B.02.03.0003

BMC Firmware Version:

   Op Code....... 1.21.6580

   Boot Code.............. 01.17

ME Firmware Version: 

   Boot Code: 02.01.07.328

   ME Health Status: CORRUPTED OR INACCESSIBLE DATA

SDR Version: 

   SDR version: SDR Package 1.11

 

Αναβάθμισα ξανά το ME firmware μόνο και το πρόβλημα λύθηκε. 

Οπότε το πρόβλημα με το corruption στο ME firmeware δεν φαίνεται ούτε από το Intel®Active System Console ούτε από το integrated bmc web console, φαίνεται μόνο από το Intel System Information Retrieve Utility.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...